Ajax, Ontario, Canada 
pic of bum or gtfo ! 
1540846
specializedbiker
wrote
Jan 14, 2010 at 12:24
Jan 14, 2010 at 12:24
don't be writing racial slurs on my note board honky,
1514866
Calikidd64
wrote
Dec 31, 2009 at 12:05
Dec 31, 2009 at 12:05
no problem man. also someone posted the same thing i said in your thread except his was a little more detailed, i think its on the first page, check it out.
1514752
Calikidd64
wrote
Dec 31, 2009 at 11:23
Dec 31, 2009 at 11:23
Just lower your float, the 831 is not worth it. All you need to do is get spacers let all air out open up spring side (undo top cap and bottom bolt) oil will come out of the bottom save that, then pull the rod out of fork leg slide the litle silver spring down push the spacers onto the rod in between the spring and flange then slide the sprin back up put the rod in pour oil back in through the bottom then close the top cap and bottom nut pump it up and you have a lowered float. Here are the spacers you would need.
http://www.jensonusa.com/store/product/FK297Z00-Fox+Racing+Shox+Fork+Spacer.aspx
http://www.jensonusa.com/store/product/FK297Z00-Fox+Racing+Shox+Fork+Spacer.aspx
Jan 29, 2010 at 15:14